surface energy Archives - PowderTechnology info

Welcome to PowderTechnology.info - Today is : January 25, 2026

Powder Plateau S Curve: How to Win When Physics Limits You
Gallery
Powder Plateau S Curve: How to Win When Physics Limits You

Additives, Bulk Solids Characterization, Editors pick, Feature Article, Flowability, Future

Powder Plateau S Curve: How to Win When Physics Limits You

The powder plateau S-curve explains why progress is [...]

By Stephane Sloots|2025-11-08T15:27:13+00:008 November 2025|Categories: Additives, Bulk Solids Characterization, Editors pick, Feature Article, Flowability, Future|Tags: additive manufacturing, AI process control, capillary forces, cohesion, DEM simulation, dynamic powder rheometry, electrostatics, flowability, gas atomization, hybrid powders, in-process sensors, Jenike ffc, passivation, plasma CVD, powder plateau S-curve, process analytics, recycling, silicon anodes, sintering, spray drying, surface energy, sustainability, triboelectric charging, van der Waals, X-ray tomography|0 Comments

The Dictators of Powder Behavior: A practical guide to powder behavior control in production
Gallery
The Dictators of Powder Behavior: A practical guide to powder behavior control in production

Cohesion, Compaction, Feature Article, Flowability, Mixing technology, Segregation

The Dictators of Powder Behavior: A practical guide to powder behavior control in production

Powder behavior control starts with fifteen core factors. [...]

Case Study: Powder Technology Principles in Laser-Assisted Bioprinting
Gallery
Case Study: Powder Technology Principles in Laser-Assisted Bioprinting

Adhesion, Case studies, Microscopy, Nano, Packing Density, Rheology, Surface Energy

Case Study: Powder Technology Principles in Laser-Assisted Bioprinting

Table of contents Executive Summary [...]

By Stephane Sloots|2025-10-08T12:24:08+01:005 October 2025|Categories: Adhesion, Case studies, Microscopy, Nano, Packing Density, Rheology, Surface Energy|Tags: adhesion, bio-inks, CFD, DEM, donor film, droplet impact, droplet spread, GMP, high-speed imaging, jetting stability, laser optics, laser-assisted bioprinting, Ohnesorge number, oxygen diffusion, packing density, perfusion, polydispersity, powder principles, quality by design, rheology, satellite droplets, substrate treatment, surface energy, tissue engineering, Weber number, yield stress|0 Comments

Moisture as a Formulation Risk: Beyond Standard Hygroscopicity Testing
Gallery
Moisture as a Formulation Risk: Beyond Standard Hygroscopicity Testing

Insights, Laboratory, Moisture Sensitivity, Surface Energy

Moisture as a Formulation Risk: Beyond Standard Hygroscopicity Testing

Moisture risk in powder formulations extends beyond mass [...]

By Anya Lindberg|2025-09-13T16:22:44+01:0013 September 2025|Categories: Insights, Laboratory, Moisture Sensitivity, Surface Energy|Tags: DVS, excipients, flowability, hygroscopicity, IGC, moisture, powder formulations, QA, recrystallization, stability, surface energy, thermal analysis|0 Comments

Agglomeration in Powder Processing: Causes and Solutions
Gallery
Agglomeration in Powder Processing: Causes and Solutions

Insights, Surface Energy

Agglomeration in Powder Processing: Causes and Solutions

Agglomeration in powder processing an introduction Agglomeration in [...]