Case studies Archives - PowderTechnology info

Welcome to PowderTechnology.info - Today is : October 29, 2025

Case Study: Powder Technology Principles in Laser-Assisted Bioprinting
Gallery
Case Study: Powder Technology Principles in Laser-Assisted Bioprinting

Adhesion, Case studies, Microscopy, Nano, Packing Density, Rheology, Surface Energy

Case Study: Powder Technology Principles in Laser-Assisted Bioprinting

Table of contents Executive Summary [...]

By Stephane Sloots|2025-10-08T12:24:08+01:005 October 2025|Categories: Adhesion, Case studies, Microscopy, Nano, Packing Density, Rheology, Surface Energy|Tags: adhesion, bio-inks, CFD, DEM, donor film, droplet impact, droplet spread, GMP, high-speed imaging, jetting stability, laser optics, laser-assisted bioprinting, Ohnesorge number, oxygen diffusion, packing density, perfusion, polydispersity, powder principles, quality by design, rheology, satellite droplets, substrate treatment, surface energy, tissue engineering, Weber number, yield stress|0 Comments

Case Study: Mitigating Spatter-Induced Powder Contamination in Laser-Powder-Bed-Fusion (LPBF) Production of Inconel 718 Aerospace Components
Gallery
Case Study: Mitigating Spatter-Induced Powder Contamination in Laser-Powder-Bed-Fusion (LPBF) Production of Inconel 718 Aerospace Components

3D printing, Aerospace Industry, Case studies, Dustiness, Metallurgy

Case Study: Mitigating Spatter-Induced Powder Contamination in Laser-Powder-Bed-Fusion (LPBF) Production of Inconel 718 Aerospace Components

LPBF spatter contamination mitigation - Treating spatter as [...]

By Stephane Sloots|2025-07-09T11:10:28+01:0017 May 2025|Categories: 3D printing, Aerospace Industry, Case studies, Dustiness, Metallurgy|0 Comments