SUBJECT

Insights

Weeksly insights offered by Powdertechnology.info powdered by Delft Solids Solutions

PUBLICATIONS

Browse publications

Explore PTI articles, Insights, Know How, and technical publications related to this subject.

  • Technical illustration comparing stable hopper discharge at adequate fill level with unstable powder flow, arching risk, and pulsing at low fill level.
    6 June 2026

    Why Hopper Fill Level Changes Powder Discharge

    Do not diagnose a feeder as if the hopper sends it one [...]

    Insights

  • Powder operating window diagram showing a stable powder operating zone surrounded by six process boundaries: consolidation and wall friction, aeration and permeability, humidity and caking, wetting and agglomerates, segregation after transfer, and temperature and time history.
    30 May 2026

    Powder Operating Window: Why a Good Powder Fails in the Wrong Process

    A powder operating window defines the process conditions in which a [...]

    Insights

  • Fine particles between larger powder particles showing how fines in powder behavior affect surface area, contact points, and restricted air paths.
    23 May 2026

    Fines in Powder Behavior: Why Small Amounts Matter

    Fines in powder behavior matter because fine particles add surface area, contact [...]

    Insights

  • Coated particle damage illustration showing intact, abraded, and cracked particles with similar particle size distribution.
    16 May 2026

    Coated Particle Damage Before Particle Size Changes

    Coated particle damage can change performance before particle size distribution shows a [...]

    Insights

  • Powder wettability illustration showing poor wetting, trapped air, dry-core clumping, and controlled dispersion in liquid.
    9 May 2026

    Powder Wettability: Why Powders Float, Clump, or Disperse

    Powder wettability controls the first contact between powder and liquid. When liquid [...]

    Insights

  • Sieve blinding in powder screening showing near-size wedging, fine-particle coating, agglomeration, and bed overload on a vibrating sieve.
    2 May 2026

    Sieve Blinding: Why Powder Screens Fail Before the Particle Size Spec Does and How to Solve it

    Sieve blinding does more than reduce screening capacity. It changes the [...]

    Insights

  • Technical illustration of dust control in powder handling at a transfer point, showing how displaced air and hood placement affect airborne dust release.
    25 April 2026

    Why Dust Control in Powder Handling Starts With Powder Behavior

    Dust control in powder handling works best when it starts with the [...]

    Insights

  • Powder flowability technical illustration comparing normal hopper discharge with arching and pulsing caused by poor venting and unstable flow.
    16 April 2026

    Powder Flowability: Factors and Measurement Techniques

    Powder flowability is not one fixed property. A powder can look free-flowing [...]

    Insights

  • FIBC discharge problems technical illustration showing how the liner-spout interface can cause unstable discharge, dust release, and residual heel in a bulk bag emptying station.
    11 April 2026

    Why FIBC Discharge Problems Often Start at the Liner-Spout Interface

    FIBC discharge problems are often blamed on the powder being discharged too [...]

    Insights

  • Pneumatic conveying attrition technical illustration showing how particles become chipped and generate fines after passing through bends in a pneumatic conveying line.
    4 April 2026

    Pneumatic Conveying Attrition: Transfer Quietly Changes Powder

    Pneumatic conveying attrition can change a powder even when the transfer looks [...]

    Insights

  • Powder dustiness technical illustration comparing two transfer situations with the same PSD, showing how moisture history, agglomerate stability, and electrostatic effects change particle detachment and airborne dust release.
    28 March 2026

    Powder Dustiness Is a Release Problem, Not a Fines Number

    Powder dustiness is a release behavior. It is not a simple fines [...]

    Insights

  • Technical illustration showing how bulk powder behavior changes between weak and strong internal contact networks in a powder bed.
    21 March 2026

    Why Bulk Powder Behavior Depends on Contact Networks, Not Just Particle Size

    Bulk powder behavior is not controlled by particle size alone. In many [...]

    Insights