SUBJECT
Chemical Composition Analysis
Publications on chemical composition, elemental analysis, contaminants, impurities, and analytical methods used to identify or quantify powder constituents.
PUBLICATIONS
Browse publications
Explore PTI articles, Insights, Know How, and technical publications related to this subject.
17 November 2026Same Powder Leachate, Different Metal Results: What Filtration Can Change
Two portions split from one eluate can show different metal results because splitting, handling, and filtration change the analyzed fraction. Check acceptance criteria, records, mechanisms, and diagnostics before drawing conclusions.
11 November 2026Can an XRF Sample-Cup Film Change a Powder’s Reported Composition?
A sample-cup film change can alter detected XRF fluorescence. Check film attenuation, calibration compatibility, blanks, and sample presentation before treating the reported shift as a powder composition change.
7 November 2026Binder Migration During Granule Drying: Why Composition Can Vary Within a Granule
Binder content does not describe where binder sits inside a granule. Evidence from PVA–alumina systems explains why drying and adsorption chemistry deserve investigation, and how to select measurements before changing the formulation or dryer.
Feature Article
7 November 2026Why Bulk Oxygen Conformity Does Not Establish Equivalent Surface Oxide
Two powders can satisfy an oxygen limit without having equivalent surfaces. Ti-6Al-4V research shows how to interpret bulk oxygen alongside XPS chemistry and calibrated depth profiles.
Insights
23 October 2026Why Can XRF Results Change With Particle Size?
A reported XRF concentration depends on the prepared specimen as well as its [...]
5 September 2026GRCop-42 and the Copper Powder Feedstock Problem in Laser Powder Bed Fusion
Copper reflects most near-infrared laser light and conducts absorbed heat away faster than almost any other engineering metal. GRCop-42's move into commercial powder catalogs shows how feedstock morphology, oxide content, and particle size distribution are being engineered around that problem rather than worked around it.
Feature Article
16 August 2025Black Mass Powder Handling: NFPA 660, 2025 Safety Regulations
Black mass is fine, conductive, and often cohesive. It brings fire, explosion, [...]
Feature Article
14 June 2025Smartphone Cover Glass: Materials, Processing, and Market Trends
Smartphone cover glass is not ordinary glass. It’s a precision-engineered material that [...]
Feature Article
17 February 2025Gypsum in Modern Construction: A Comprehensive Overview
At PowderTechnology.info, we’ve long been fascinated by the humble yet mighty gypsum. [...]
Feature Article
12 January 2025Silica Fume Applications: Transforming Construction and Powder Technology
Silica fume, also known as microsilica, is an ultrafine material composed of [...]
Feature Article
3 November 2024Perovskite Solar Cells: Unlocking Their Potential in Photovoltaics
In this article, we'll look at the fascinating object of Perovskite Solar [...]
Feature Article
12 October 2024Assessing Powder Packing Density
In many industries, from pharmaceuticals to construction, powder packing density plays a [...]
Feature Article

