SUBJECT

Bulk Solids Characterization

Publications on the measurement and interpretation of bulk powder properties relevant to flow, storage, handling, processing, and product performance.

PUBLICATIONS

Browse publications

Explore PTI articles, Insights, Know How, and technical publications related to this subject.

  • Sieve blinding in powder screening showing near-size wedging, fine-particle coating, agglomeration, and bed overload on a vibrating sieve.
    2 May 2026

    Sieve Blinding: Why Powder Screens Fail Before the Particle Size Spec Does and How to Solve it

    Sieve blinding does more than reduce screening capacity. It changes the [...]

    Insights

  • Acoustic emission for flow blockage prediction sensor mounted near the lower cone outlet of a powder hopper
    18 April 2026

    Acoustic Emission for Flow Blockage Prediction

    Acoustic emission for flow blockage prediction captures high-frequency stress waves generated by [...]

    Feature Article

  • Wall friction and hopper geometry shown in two stainless steel powder hoppers comparing mass flow and funnel flow
    21 March 2026

    Wall Friction and Hopper Geometry: Why Some Bins Mass Flow and Others Funnel Flow

    Mass flow requires hopper walls that are steep and smooth enough for [...]

    Feature Article

  • Technical illustration showing how bulk powder behavior changes between weak and strong internal contact networks in a powder bed.
    21 March 2026

    Why Bulk Powder Behavior Depends on Contact Networks, Not Just Particle Size

    Bulk powder behavior is not controlled by particle size alone. In many [...]

    Insights

  • Technical illustration of loss in weight feeder drift showing refill driven packing density and aeration changes at the screw inlet
    7 March 2026

    Loss in Weight Feeder Drift After Refill: The Refill Shock Mechanism and How to Diagnose It

    Loss in weight feeder drift often starts at refill, not at tuning. [...]

    Insights

  • Porosity in food powders
    28 February 2026

    Functional Importance of Porosity in Food Powders

    Article updated February 2026 Porosity controls hydration speed, dissolution, compressibility, and [...]

    Feature Article

  • Square hero image showing a powder quality release workflow: sampling, test limits, and a one page lot release decision sheet.
    28 February 2026

    Powder Release Protocol: Sampling Rules and Acceptance Criteria Guide and Check-List

    A powder release protocol is an incoming gate that protects your operating [...]

    Know How

  • Deaeration lag in powders, hopper cutaway showing aerated bed with trapped air bubbles versus compacted bed, causing pause and surge discharge rate
    14 February 2026

    Deaeration lag, why “easy flowing” powders still surge

    Deaeration lag in powders creates a timing mismatch between how fast your [...]

    Insights

  • Powder discharging into a receiving hopper with a small dust cloud at the transfer point, illustrating why universal dust explosivity criteria depend on dispersion conditions.
    7 February 2026

    The Search for Universal Dust Explosivity Criteria

    Universal dust explosivity criteria fail because explosibility depends on dispersion, turbulence, ignition, [...]

    Feature Article

  • Wall friction drift in hoppers, shown as clean wall flow versus film driven ratholing.
    31 January 2026

    Wall Friction Drift in Hoppers: Why Discharge Degrades Over Time

    Many hopper issues are boundary-limited. Wall friction drifts upward over time, so [...]

    Insights

  • Illustration showing water activity in powders versus moisture content, with internal water inside particles and surface water forming liquid bridges at particle contacts.
    24 January 2026

    Water Activity in Powders: Why Moisture Content Misleads in line drifts during production

    Water activity in powders predicts caking, sticking, and flow loss better than moisture [...]

    Insights

  • Clipboard showing a t0 vs t24 powder strength table next to a shear tester and stacked bags, used to separate caking from compaction.
    17 January 2026

    Powder Caking vs Compaction Test: That Tells You Which Problem You Have

    Powder caking vs compaction can look identical in production. However, they need [...]

    Insights