SUBJECT

Insights

Weeksly insights offered by Powdertechnology.info powdered by Delft Solids Solutions

PUBLICATIONS

Browse publications

Explore PTI articles, Insights, Know How, and technical publications related to this subject.

  • Two transparent bottles comparing particle distribution after controlled powder filling, with segregation visible in one bottle.
    4 October 2025

    Powder Segregation Test: What a Simple Bottle Method Can and Cannot Show

    A bottle test is a fast, qualitative screen for whether filling conditions make a [...]

    Insights

  • Square hero image illustrating hidden charge peaks in powder flows with localized hotspots.
    27 September 2025

    Hidden Charge Peaks in Powder Flows: Measure What is missed

    Do not accept a safe net charge as proof of safety. Find [...]

    Insights

  • Catalytic hot spots in powders shown by a lab setup with a Karl Fischer titrator, a weigh boat of powder, and a microbalance on a clean bench.
    20 September 2025

    Catalytic Hot Spots in Powders: Small Regions, Big Consequences

    Catalytic hot spots in powders often determine stability. Detect them early with [...]

    Insights

  • Close-up macro view showing moisture droplets condensing on fine powder particles, illustrating moisture risk in powder formulations.
    13 September 2025

    Moisture as a Formulation Risk: Beyond Standard Hygroscopicity Testing

    Moisture risk in powder formulations extends beyond mass uptake. Water reshapes surfaces, [...]

    Insights

  • Cobalt exposure limits powder manufacturing worker in PPE with respirator, dusted with cobalt powder.
    6 September 2025

    Cobalt Exposure Limits in Powder Manufacturing: Five Steps to EU Compliance

    Cobalt exposure limits in powder manufacturing are tightening. Plants must act now [...]

    Insights

  • Flat-style infographic illustrating powder waste in manufacturing with a hopper, weighing scale, and financial loss symbols.
    30 August 2025

    The Real Cost of Powder Waste in Manufacturing: How small waste adds up

    Even a fraction of powder waste in manufacturing erodes yield, raises costs, [...]

    Insights

  • Dustiness test setup: scientist uses a continuous drop rig with CPC and ELPI, rotating drum visible
    23 August 2025

    Dustiness Tests Compared: EN 15051 Versus EN 17199-4

    Use EN 15051 for mass-based dustiness in health-related fractions. The rotating drum [...]

    Insights

  • Sealed powder transfer line with hopper, rotary valve, HEPA filter and gauge, illustrating containment for REACH microplastics reporting.
    16 August 2025

    REACH microplastics reporting: EU restriction, polymer powders

    The EU’s microplastics rules, REACH microplastics reporting, bring labelling and annual reporting [...]

    Insights

  • Thermal view of melt pool during metal 3D printing, showing AI monitoring in additive manufacturing.
    9 August 2025

    What AI Monitoring Can and Cannot Tell You About Lower-Cost Metal Powders

    Lower-cost metal powders can produce high-quality parts in laser powder bed fusion (LPBF), but [...]

    Insights

  • Close-up of powder flow from a hopper, illustrating the link between packing density and powder flow.
    2 August 2025

    Balancing Packing Density and Powder Flow in Continuous Processing

    Packing density and powder flow rarely align naturally. Engineering this balance requires [...]

    Insights

  • On-demand atomisation metal powder system in an R&D laboratory.
    26 July 2025

    On-Demand Atomisation: Custom Metal Powders for R&D and Prototyping

    On-demand atomisation metal powder low-volume production is changing the way labs and [...]

    Insights

  • Robotic powder handling system dispensing fine powder into a beaker with real-time flow control
    19 July 2025

    Robots Can Now Weigh Powders Reliably—Thanks to Flowability-Informed Control

    Machine learning now allows robots to adjust dosing motions based on real-time [...]

    Insights