SUBJECT
Bulk Solids Characterization
Publications on the measurement and interpretation of bulk powder properties relevant to flow, storage, handling, processing, and product performance.
PUBLICATIONS
Browse publications
Explore PTI articles, Insights, Know How, and technical publications related to this subject.
13 September 2025Deep-Sea Particle Dynamics, Through a Powder Lens
vDeep-sea particle dynamics show powder engineering mechanics in powder dynamics. Deep trenches [...]
Feature Article
6 September 2025Cobalt Exposure Limits in Powder Manufacturing: Five Steps to EU Compliance
Cobalt exposure limits in powder manufacturing are tightening. Plants must act now [...]
Insights
30 August 2025The Real Cost of Powder Waste in Manufacturing: How small waste adds up
Even a fraction of powder waste in manufacturing erodes yield, raises costs, [...]
Insights
23 August 2025Dustiness Tests Compared: EN 15051 Versus EN 17199-4
Use EN 15051 for mass-based dustiness in health-related fractions. The rotating drum [...]
Insights
16 August 2025REACH microplastics reporting: EU restriction, polymer powders
The EU’s microplastics rules, REACH microplastics reporting, bring labelling and annual reporting [...]
Insights
2 August 2025Balancing Packing Density and Powder Flow in Continuous Processing
Packing density and powder flow rarely align naturally. Engineering this balance requires [...]
Insights
6 July 2025Powders Under Pressure: Why Deformation Behavior Matters
powder deformation behavior under pressure in different ways. Understanding their behavior improves [...]
Insights
6 July 2025Quantum Thinking in Powder Technology: Embracing Uncertainty for Better Process Design
Quantum thinking in powder technology isn’t about physics. It’s a mindset shift. [...]
Feature Article
5 July 2025Segregation Mechanisms and Prevention in Blending and Transport
Segregation ruins powder blends after mixing. This article breaks down the five [...]
Know How
29 June 2025The Slow Collapse of “Stable” Powders: powder aging and degradation
Powders degrade quietly. Over time, even stable materials shift in chemistry, structure, [...]
Insights
28 June 2025Shear Cell Testing for Hopper Design and Powder Flow
Shear cell testing measures the strength and friction properties needed to design hoppers and [...]
Feature Article
9 June 2025Powder Flow vs. Powder Flooding: Where’s the Line?
Powder flooding occurs when entrained gas reduces resistance to flow, allowing material to [...]
Insights

